BNTQM - 39-900000-195 SEAL-N-PLACE, PART A
- MSDS: BNTQM
- Manufacturer: SYON CORP
- Product Name: 39-900000-195 SEAL-N-PLACE, PART A
- National Stock Number: 8040-01-108-6660
Product Identification
Product ID:39-900000-195 SEAL-N-PLACE, PART A
MSDS Date:04/01/1985
FSC:8040
NIIN:01-108-6660
Kit Part:Y
MSDS Number: BNTQM
Responsible Party
ASHLAND, MA 01721
US
Emergency Phone: 508-881-8852
Info Phone: 508-881-8852
Cage: SYONC
Contractor
Telephone: 508-881-8852
Cage: SYONC
Ingredients
EPICHLOROHYDRIN (SARA III)
CAS: 106-89-8
RTECS: TX4900000
Fraction By Weight: 0.0013%
OSHA PEL S, 5 PPM
ACGIH TLV: S, 2 PPM; 9293
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
Hazards
Health Hazards Acute and Chronic:POSSIBLE IRRITATION AND SENSITIZATION.
First Aid
First Aid:GET MEDICAL ATTENTION IMMEDIATELY. EYES: FLUSH WITH WATER FOR
AT LEAST 15 MINUTES. SKIN: REMOVE CONTAMINATED CLOTHING. WASH WITH
SOAP AND WATER. INGESTION: IF CONSCIOUS, GIVE WATER OR MILK. INDUCE
VOM ITING. INHALATION: REMOVE TO FRESH AIR.GIVE OXYGEN & ARTIFICIAL
RESPIRATION IF NECESSARY.
Fire Fighting
Flash Point Method:TOC
Flash Point:200F,93C
Extinguishing Media:CO2, DRY CHEMCIAL, FOAM.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:WEAR APPROPRIATE PROTECTIVE CLOTHING AND
RESPIRATOR. SCOOP UP EXCESS AND REMOVE. RESIDUAL CAN BE REMOVED
WITH NONFLAMMABLE SOLVENT.
Exposure Controls
Respiratory Protection:NIOSH APPROVED ORGANIC VAPOR RESPIRATOR.
Ventilation:LOCAL & MECHANICAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SPLASH PROOF GOGGLES.
Other Protective Equipment:SAFETY SHOWERS AND EYE WASH FACILITIES.
Supplemental Safety and Health
Chemical Properties
Spec Gravity:1.16
Solubility in Water:INSOLUBLE
Appearance and Odor:GRAY LIQUID.
Percent Volatiles by Volume:<1
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:STORAGE AT ELEVATED TEMPERATURES OVER LONG
PERIODS OF TIME.
Hazardous Decomposition Products:CO, CO2.
Conditions to Avoid Polymerization:EXCESSIVE EXOTHERMS WHEN CURED.
Disposal
Waste Disposal Methods:INCINERATE IN ACCORDANCE WITH LOCAL POLLUTION
REGULATIONS AND ORDINANCES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.